Module - First setup

When you have received your Daytopper module, you need to go throuh the following steps to activate your module:

Step 1

If you have ordered a cable with your module, you can plug the cable into your module and then plug it into a power outlet using a USB plug.

Step 2

When the module is powered on, it will broadcast a WiFi network called Daytopper. You can connect to this network with your phone, tablet or laptop.

Step 3

When you have connected to the WiFi network Daytopper, a popup will be openend automatically. In this popup you select configure WIFI.

Step 4

The module is now scanning the available WiFi networks. When the scan is completed, you can select your WiFi network and fill in the password and click on Save.

Step 5

When everything is filled in correctly, the module will connect to your WiFi network. If the module cannot connect to your WiFi, it will broadcast the WiFi network Daytopper again.

Step 6

As the module is now connected to your WiFi network, you can go to the Daytopper App and follow the steps that are described here